Pictured above are our prototypes from the proof-of- concept piece through the final production unit.
We developed and brought The Original PuP Light Mount to market because we know that, just like us, there are other AUG pattern rifle owners out there who love the rifle and its unique design features but have relegated it to the safe and range due to the “illumination problem” and the obvious necessity of a quality tactical light on a defensive rifle.
After years of frustration searching for an illumination solution that properly addressed the design challenges of these rifles, and not being satisfied by endless weighty bolt-on rail configurations and cumbersome tape-switches with gangly wiring. All of which greatly increases the weapon's profile and thus the likelihood of dangerous, "Non-Tactical Hang-Up's", we pressed on! The Original PuP Light Mount was designed by a Journeyman Machinist with over 20 years experience in machining, metallurgy and failure analysis. Development and testing was executed in cooperation with a small dedicated group of designers and defensive shooting enthusiasts.
The Original PuP Light Mount is the finest illumination solution ever made available for AUG pattern rifles and is designed to fit all standard models of Steyr AUG, Microtech MSAR rifles and the New Lithgow EF88 / F90. Note: It will NOT fit rifles equipped with the CQC rail kit.
Great care was taken with the monolithic design to perfectly balance: profile, weight, heat transfer, and thermal radiation, all while maximizing strength and the ergonomic position that is perfectly oriented relative to the AUGs forward grip.
Machined from a single billet of certified 6061 Aluminum , The Original PuP Light Mount, with the included hardware, weighs only 629 grains (1.44 Oz). That's less than a single .50BMG projectile!
The Original PuP Light Mount is proudly 100% American Made! The Design, the Aluminum, the Machining, the Grade 8 Hardware, Mil-A-8625 Type III Hard Coat Anodizing are all done in the United States of America, even the printed and shipping materials are domestically sourced! We pledge that as long as Battlefield Innovations is in charge, that will NEVER change!
We are committed to supporting our country in every possible way. We make every effort to source ALL of our materials domestically. Office supplies, tools, product materials, shipping materials, fasteners, product services… If we need it and America makes it, we get it from home. We even pay Taxes!
We want to give a very special thanks to all of the veterans who have fought and lost to defend the American Dream we all pursue. Without your sacrifice, the realization of our dreams wouldn’t be possible.
Battlefield Innovations is working hard to carve out our little corner of the industry, and appreciate your support. We openly and enthusiastically encourage your input on our products and ideas for improvement. You, our customers, will be instrumental in shaping the future of our business. We commit, that for the life of our company, the first of our customers that offers an Innovation that finds its way to market, will enjoy a copy of that product at No Cost! Even shipping is on us!
Please note that we batch produce and our initial supply is limited. We pledge to do our best to keep up with customer demand but the possibility exists that your Original PuP Light Mount may need to be put on back order. If this does happen, we will do everything in our power to get your rifle out of the darkness and into the Light, as fast as humanly possible.
We have a few other tricks up our sleeve for the future, so please stay tuned. Due to the nature of our business and the extreme awesomeness of our future product line, we have to keep those projects close to our vest until they are ready for release. But know, they’re coming… and they will be handy.
Legal Stuff: Battlefield Innovations has worked hard to provide the consumer with a Strong and Reliable Tactical / Sporting solution, and we stand behind our product. Due to the nature of this device, its intended applications, and the infinite number of variables therein, Battlefield Innovations will in no way be held civilly or criminally responsible for any injury or damages resulting from, involving, or associated with The Original PuP Light Mount in ANY way. Including, but not limited to: defensive rifle use, offensive rifle use, misuse of the product (as determined solely by Battlefield Innovations), tactical training, military use, sporting use, type and style of batteries, type and style of flashlight, use not associated with a weapon, use as a weapon, etc.
Warranty: The Original PuP Light Mount is guaranteed to be free of defects in material and craftsmanship. We here at Battlefield Innovations take great pride in offering a quality product at a fair price. Any issues or concerns with this or any Battlefield Innovations product, please contact us at: support@battlefieldinnovations.com and we will do our best to make it right.
Please feel free to contact us with comments, concerns, input or ideas at: support@battlefieldinnovations.com
All images and text copyright Battlefield Innovations LLC 2015
After years of frustration searching for an illumination solution that properly addressed the design challenges of these rifles, and not being satisfied by endless weighty bolt-on rail configurations and cumbersome tape-switches with gangly wiring. All of which greatly increases the weapon's profile and thus the likelihood of dangerous, "Non-Tactical Hang-Up's", we pressed on! The Original PuP Light Mount was designed by a Journeyman Machinist with over 20 years experience in machining, metallurgy and failure analysis. Development and testing was executed in cooperation with a small dedicated group of designers and defensive shooting enthusiasts.
The Original PuP Light Mount is the finest illumination solution ever made available for AUG pattern rifles and is designed to fit all standard models of Steyr AUG, Microtech MSAR rifles and the New Lithgow EF88 / F90. Note: It will NOT fit rifles equipped with the CQC rail kit.
Great care was taken with the monolithic design to perfectly balance: profile, weight, heat transfer, and thermal radiation, all while maximizing strength and the ergonomic position that is perfectly oriented relative to the AUGs forward grip.
Machined from a single billet of certified 6061 Aluminum , The Original PuP Light Mount, with the included hardware, weighs only 629 grains (1.44 Oz). That's less than a single .50BMG projectile!
The Original PuP Light Mount is proudly 100% American Made! The Design, the Aluminum, the Machining, the Grade 8 Hardware, Mil-A-8625 Type III Hard Coat Anodizing are all done in the United States of America, even the printed and shipping materials are domestically sourced! We pledge that as long as Battlefield Innovations is in charge, that will NEVER change!
We are committed to supporting our country in every possible way. We make every effort to source ALL of our materials domestically. Office supplies, tools, product materials, shipping materials, fasteners, product services… If we need it and America makes it, we get it from home. We even pay Taxes!
We want to give a very special thanks to all of the veterans who have fought and lost to defend the American Dream we all pursue. Without your sacrifice, the realization of our dreams wouldn’t be possible.
Battlefield Innovations is working hard to carve out our little corner of the industry, and appreciate your support. We openly and enthusiastically encourage your input on our products and ideas for improvement. You, our customers, will be instrumental in shaping the future of our business. We commit, that for the life of our company, the first of our customers that offers an Innovation that finds its way to market, will enjoy a copy of that product at No Cost! Even shipping is on us!
Please note that we batch produce and our initial supply is limited. We pledge to do our best to keep up with customer demand but the possibility exists that your Original PuP Light Mount may need to be put on back order. If this does happen, we will do everything in our power to get your rifle out of the darkness and into the Light, as fast as humanly possible.
We have a few other tricks up our sleeve for the future, so please stay tuned. Due to the nature of our business and the extreme awesomeness of our future product line, we have to keep those projects close to our vest until they are ready for release. But know, they’re coming… and they will be handy.
Legal Stuff: Battlefield Innovations has worked hard to provide the consumer with a Strong and Reliable Tactical / Sporting solution, and we stand behind our product. Due to the nature of this device, its intended applications, and the infinite number of variables therein, Battlefield Innovations will in no way be held civilly or criminally responsible for any injury or damages resulting from, involving, or associated with The Original PuP Light Mount in ANY way. Including, but not limited to: defensive rifle use, offensive rifle use, misuse of the product (as determined solely by Battlefield Innovations), tactical training, military use, sporting use, type and style of batteries, type and style of flashlight, use not associated with a weapon, use as a weapon, etc.
Warranty: The Original PuP Light Mount is guaranteed to be free of defects in material and craftsmanship. We here at Battlefield Innovations take great pride in offering a quality product at a fair price. Any issues or concerns with this or any Battlefield Innovations product, please contact us at: support@battlefieldinnovations.com and we will do our best to make it right.
Please feel free to contact us with comments, concerns, input or ideas at: support@battlefieldinnovations.com
All images and text copyright Battlefield Innovations LLC 2015